PE ground source heat pump pipes

1. Renewable energy: Ground source heat pumps are heating and air conditioning systems that utilize solar energy resources stored in Earth's water bodies as cold and heat sources for energy conversion. The water bodies that can be utilized, including groundwater or rivers, rivers and lakes on the surface, and oceans, are a huge dynamic energy balance system. The soil and water on the surface naturally maintain a relative balance of energy reception and dissipation.2. Efficient, energy-saving, stable and reliable: The temperature of geothermal energy or shallow geothermal resources on the surface is relatively stable throughout the year, with a temperature difference between soil and air of generally 17 degrees. In winter, the temperature is higher than the ambient air temperature, and in summer, it is lower than the ambient air temperature, making it a good heat pump heat source and air conditioning cold source. This temperature characteristic makes the ground source heat pump more efficient than traditional air conditioning systems by 40% to 60%, thus saving energy and operating costs by about 40% to 50%, The heating coefficient can reach up to 4.3 (normally 3.5-4.5), which means that inputting 1KW of electrical energy can generate 4KW of heat. So we call it an energy-saving air conditioning system.3. No environmental pollution: Compared with air source heat pumps, the pollutant emissions of ground source heat pumps are reduced by more than 40%, and compared with electric heating, they are reduced by more than 70%, truly achieving energy conservation and emission reduction.A building of 10000 square meters can save 350 tons of coal and reduce 3.85 million cubic meters of smoke emissions in one heating period.4. Low operating cost: It is cheaper than coal-fired heating because the utilization of thermal energy from the soil, rock layers, groundwater, rivers, lakes, and seas below accounts for 70% -75% of the total heat. This means that during the heating process of the unit, 70% -75% of the fuel is free of charge. In addition, the ground source heat pump system has fewer moving components than conventional systems, thus reducing maintenance. The system is installed indoors, not exposed to wind and rain, and can also be protected from damage, making it more reliable and extending its lifespan.5. Flexible application, one machine for multiple purposes: The ground source heat pump system can provide heating, cooling, and domestic hot water. One machine can be used for multiple purposes, and one system can replace the original two sets of devices or systems for boilers and air conditioning.6. Small footprint and space saving: The ground source heat pump unit occupies 1/10-1/15 of the boiler land. Taking a 100000 square meter residential area as an example, a computer room area of only 100 square meters is sufficient, while building a boiler room requires an area of at least 1000 square meters. For residential areas with an area of over 35000 square meters, the location of one building can be saved, and a residential area of 2000-5000 square meters can be built. The remaining value is enough to cover the cost of installing and using a ground source heat pump heating system.7. Aesthetics: Flexible installation, free placement of units, without special consideration of ventilation issues, can be integrated with architectural style, especially for micro style buildings, where the roof is not suitable for placing units, while ground source heat pumps can be placed arbitrarily.8. Long service life: The underground pipes of the ground source heat pump are made of polyethylene plastic pipes, with a lifespan of up to 50 years, which is 35 years longer than that of ordinary air conditioners.